uPVC-pipes

UNIPLAST Unplasticized Polyvinyl Chloride Pipes (UPVC)

uPVC Pipes are light in weight, flexible and durable. PVC is most popular material due to its superior strength and stiffness to weight ratio, thus enabling more cost-effective pipes to be produced. UNIPLAST uPVC pipes are manufactured with accordance to the international standards for different types of uses mainly to British & European standards. Our manufacturing standards are BS6099/1928, BS4607, BSEN 1401, DIN 19531, DIN 19534, DIN 8062/63, BS5255 and BS 4514.

Advantages of UNIPLAST UPVC Pipes System.

 

Light Weight: Hence transport and handling is simple and convenient.

Chemical Resistance: An Excellent chemical resistance of UPVC to acids, alkalies and oxidizing and reducing agents makes it suitable for all applications.

High Flow Rate: A The smooth internal bore gives excellent flow properties which remain constant throughout the life of the systems.

Non-inflammable: UPVC does not support combustion and is self-extinguishing.

Non-Conductive: A UPVC is a non-conductor and hence not attacked by galvanic or electrolytic action.

Weather Resistance: A Specially blended UV stabilized compound offers an excellent outdoor weathering performance. High durability.

Easy Installation: A Tough, impact-resistant and easy to install.

Corrosion Resistance: A UPVC is non-corrosive and hence constant with water does not deteriorate the material.

Aesthetic Superiority: A UPVC is aesthetically far superior to conventional systems.

 

Properties at 20° CUnitValuesMethod of Evaluation

Physical Properties
Specific Gravity at 23° 1.43 ASTM D 792
Flammability No Support ASTM D 635
Resistance of burning Sec. <30 BS 4607 PART 2.70
Softening PT.(VSP 5Kgf) °C 82 BS 2782-1976
Shore Hardness 81 ASTM D 2240-75
Thermal Conductivity 10/30°C W/m-k 0.17 BS 874-1973
Co-efficient of Linear Expansion °C-1 6×10-6 ASTM D 696
Specific Heat cal/g°C 0.25
Mechanical Properties
Tensile Strength 20° at Break Kg/cm2 480-550 ISO R 257
Impact Strength (Izod) Joule 4.75-5.42 DIN 53453
(Inch Notch Charpy)
Impact Strength (Free Falling) No Break SAS 14 1396 & BS 3506
Modulus of Elasticity kp/cm2 cm/cm 3×104 DIN 53457
Compressive Strength kp/cm 668 BS 4607 PART 2:70
Flexural Strength kp/cm2 950 ASTM D 790
Elongation at Break % >125 ISO R 527
Yield Stress kp/cm2 >400 ISO R 527
Resistance to heat (Impression Diameter) <2 BS 4607 Part 2:70
Chemical Properties
Resistance to Sulphuric Acid g/45cm2 -0.013+0.316 BS 3506 /69
Resistance to Methylene % <3 ISO 2508/81
Resistance to Water Absorption mg/cm <2.0 ISO 2508/81 &DIN 8091
Toxicity
Toxicity mg/L PbSAS 14 1396/H
Sn
Ba
Zn
Cd
Electrical Properties
Volume Resistively Ohm/cm 1014
Surface Resistance ohm 1012 DIN 53482
Power Factor at 10 HERTZ 3
Dielectric strength V/mil 1400 BS 4607 Part 2
Insulation Resistance M.ohm 1.1X105 BS 4607 Part 2